Return to Suppliers
Formerly Pacific Pump Co. Pumping and Water Treatment Systems
for:
 Mining
Municipal Industry Agriculture
  
The Pump Division (formerly Pacific Pump Company) began
operating in 1949 as a manufacturer of small engine driven self priming centrifugal pumps.
Sold for over five decades, these pumps earnt a reputation for being efficient, reliable
and extremely long lasting. Today, the Pump Division distribute a wide range of pumps and
associated water treatment products.
|
Product Index: (click the name for more information)
GORMAN-RUPP self-priming pumps for the water
and waste-water industry.
TSURUMI submersible pumps for the water and
waste-water industry.
TOYO submersible and conventional slurry pumps.
PLEUGER multistage submersible pumps have been
distributed by Pacific Pump Company for over 35 years.
CAT high pressure pumps are available in both piston
and plunger type configurations.
HARBEN have manufactured the reliable radial piston
diaphragm pump for over 20 years.
CROWN plunger pumps are built to exacting standards
to meet the requirements of the ultra-high pressure water jetting industry.
PACIFIC DOMINATOR high pressure water
cleaners form an extensive part of the Pacific high pressure pump range.
CEMO helical rotor pumps have been established in
Australia for many years.
PACO supply a wide range of pumps for the water
supply and waste water industry.
JOHNSTON have been supplying the finest vertical
turbine pumps since 1909.
PACER non-metallic pumps are ideally suited to
applications where corrosive liquids are encountered.
LIBELLULA mechanical diaphragm pumps are ideally
suited to mobile solids pumping applications.
J.S. MASKINFABRIK are the manufacturers
of the LAMELLA sliding vane pumps.
CUSTOM BUILT UNITS can be supplied by
Pacific Pump Company. |
|
GORMAN-RUPP self-priming pumps for the water and waste-water industry. Other
models available include air operated diaphragm pumps for sludges and slurries,
Gorman-Rupp G-Series gear pumps for viscous liquids and chemical transfer, Gorman-Rupp end
suction and high head pumps for contractor and mine use, Gorman-Rupp packaged pumping
stations, refuelling pumps, water tanker pumps, Pacific Iron-Heart portable engine driven
pumps and a range of related products.
Gorman-Rupp have been producing the finest self priming pumps since 1933, with a pump in
the range to suit almost every clean water, solids handling, corrosive and abrasive
application. |
|
Product Index
|
 |
TSURUMI submersible pumps for the water and waste-water industry. Tsurumi
have been manufacturing submersible pumps since 1924, and their range includes over 2600
different models. Included in this range are the B-Series, U-Series and C-series
submersible sewage pumps, a complete range of smaller pumps for domestic dewatering,
flameproof pumps for hazardous environments, titanium pumps for extremely corrosive
applications as well as a range of high head abrasive resistant pumps for mine and quarry
dewatering.
Tsurumi also supply a dedicated range of waste water treatment products, including
in-channel bar screens, submersible aerators and sludge dehydrators. |
Product Index
|
| TOYO
submersible and conventional slurry pumps. Toyo have been manufacturing some of the
world's largest submersible slurry pumps for many years, with models up to 1200 hp
available. Toyo submersible and vertical column slurry pumps feature the patented
mechanical agitator, which allows these units to pump higher concentrations of solids than
any other submersible pump. Used predominantly for ocean dredging, TOYO pumps can also be
found in many concrete batch plants, mines, quarries and other arduous applications.
Hydraulically driven units and add-on excavators make these some of the most versatile
dredging pumps available. |
Product Index
|
PLEUGER multistage submersible pumps have been distributed by Pacific Pump
Company for over 35 years. With a full range of models available in a wide range of
materials, Pleuger pumps enjoy the reputation of being one of the finest submersible bore
pumps available. Used extensively for mine dewatering, town water supply, rural water
supply and many other applications, Pleuger pumps and motors ensure low maintenance,
guaranteed efficiency and the support of a quality assured testing and service facility.
Pacific Pumps / Pleuger service facility also includes a specialised "wet
stator" motor rewind and repair section to provide complete in-house servicing. |
|
Product Index
|
| CAT high pressure pumps are available in both piston and plunger type
configurations. With flows to 227 lpm and pressures to 5000 psi, Cat manufacture a pump to
meet almost every medium to high pressure jetting application. For corrosive applications,
Cat pumps are available in 316 stainless steel and nickel aluminium bronze construction.
These units can be used for high pressure water cleaning, descaling, pipe cleaning,
reverse osmosis and many other high pressure applications. |
Product Index
|
| HARBEN have manufactured the reliable radial piston diaphragm pump for over
20 years. This proven design offers the ability to run dry without damage to the pump and
is also capable of pumping salt water without modification. With a wide range of
configurations including skid mount, trailer mount, diesel and electric drive, Harben
pumps can be used for almost every high pressure water jetting application. Typical uses
include descaling, drain cleaning, hydro demolition, ship hull cleaning and many other
applications. With pressures to 12,000 PSI (61,000 PSI with the Neolith plunger pumps) and
a full range of high pressure accessories, Harben can supply a pump unit to meet
individual customer requirements. |
Product Index
|
| CROWN plunger pumps are built to
exacting standards to meet the requirements of the ultra-high pressure water jetting
industry. With pressures to 20,000 PSI (1400 Bar) and flow rates to 726 litres per minute,
Crown pumps are ideal for high pressure cleaning systems, boiler feed, reverse osmosis,
drain cleaning units and many other industrial high pressure applications. Units are
available in a number of materials of construction and can be factory fitt flygted with a
reduction gearbox for simple and precise installation. Crown also manufacture a range of
pumps for the high pressure transfer of slurries and other viscous products. |
Product Index
|
| PACIFIC DOMINATOR high
pressure water cleaners form an extensive part of the Pacific high pressure pump range.
Units are available from small but powerful domestic machines right up to the large,
commercial quality in-place cleaning systems. With pressures to 3000 PSI and flows to 30
litres per minute, Pacific can supply a unit to meet every cleaning requirement. Dominator
high pressure water cleaners are available in both 240 and 415 volt models, and also for
the pumping of both cold and hot water. A full range of accessories makes the Pacific
Dominator range of high pressure water cleaners one of the most versatile on the market. |
Product Index
|
CEMO helical rotor pumps have been established in Australia for many
years. This high quality range features models for agricultural, industrial and mining
applications. Ideal for all high pressure fluid transfer jobs, from irrigation to the
pumping of waste products or mine water, CEMO pumps are both high quality and excellent
value. A wide-throat model is available for the pumping of liquids with high
concentrations of larger solids. CEMO also manufacture a range of borehole helical rotor
pumps and a heavy duty hand operated helical rotor pump for wells without a power supply |
Product Index
|
PACO supply a wide range of pumps for the water supply and waste water
industry. Founded in 1907, Paco manufacture large split case pumps, end suction
centrifugal pumps, high pressure booster pump systems, vertical centrifugal pumps and also
an extensive range of high pressure regenerative turbine pumps. Many PACO pumps can be
found in the air conditioning, construction, municipal and water supply industry. Pumps
are available in a choice of materials for corrosive and abrasive applications. |
Product Index
|
JOHNSTON have been
supplying the finest vertical turbine pumps since 1909. These units can be found in many
areas, including mining, fire prevention, flood irrigation, town water supply, power
generation and various process industries. A full range of vertical turbine, mixed and
axial flow models is available to suit almost every application. Johnston pumps are
available with flow rates in excess of 1000 litres per second and pressures over 700
metres, making them suitable for almost every high pressure and high flow water transfer
application. |
Product Index
|
PACER non-metallic pumps are ideally suited to applications where
corrosive liquids are encountered. A huge range of models, including end suction, self
priming, magnetic drive, vertical column, air operated, hydraulic, petrol, diesel,
electric, pneumatic drive and hand operated pumps is available. Pacer pumps can be
manufactured in a number of different materials to suit a multitude of chemical transfer
jobs. Pacific have been supplying Pacer pumps since 1980, and have the experience to
supply the right pump to meet individual customer requirements. |
Product Index
|
LIBELLULA mechanical
diaphragm pumps are ideally suited to mobile solids pumping applications. These heavy duty
diaphragm pumps are available in discharge sizes from 2 inch (50mm) to 6 inch (150mm). A
range of Duplex pumps, supplied in either cast iron and aluminium, are available.
Libellula pumps can be supplied with a number of different elastomer materials for
corrosive and abrasive applications. Driven by either a petrol or diesel engine or
electric motor, these units are portable, reliable and designed to pump liquids with a
high solids concentration. |
Product Index
|
J.S. MASKINFABRIK are the
manufacturers of the LAMELLA sliding vane pumps. These units are available in a number of
sizes, and are specifically designed for the pumping of highly viscous products such as
offal and fish meal. Lamella pumps can greatly reduce the amount of manual handling of
these products, and due to the reduced use of water in the transfer process, will reduce
the cooking times in tallow production plants. Both standard and clamp versions are
available, the latter offering easy cleaning in place. Pacific can supply a complete
package including pump, drive, reduction gearbox and heavy duty auger feed unit to suit
individual application requirements. |
Product Index
|
CUSTOM BUILT UNITS can be supplied by
Pacific Pump Company. With our extensive product range, Quality Accredited workshop
facility and almost 50 years experience in the supply of industrial, agricultural and
process equipment, Pacific can engineer a pump package to meet every application |
Product Index
|
TOP
|
HOME
PRODUCTS
APPLICATIONS
SPECIALS
CONTACTS
EMAIL
Return to Frames View
2/02/02
|